Dimas Taha Maulana

Geothermal and Petroleum drilling and production, reservoir modelling, and geothermal power plant design and economic analysis.

Teaching and lecturing

Ability to research and analysis

Ability to using geothermal software for example: Petrasim, Wellsim and Leapfrog

Lecturer:

• Lecture at Geothermal Master Program ITB on subjects “Geothermal Production Engineering (PB-5011)” (2017).
• Lecture at Geothermal Master Program ITB on subjects “Geothermal Prospect Evaluation (PB-6013)” (2017).

Supervisor:

• Supervisor at Study Program of Petroleum Engineering ITB on final project titled “Economic Analysis of Deep Slim Hole Drilling in Geothermal“ (2017)
• Supervisor at Study Program of Petroleum Engineering ITB on final project titled “Production Simulation of Geothermal Deep Slim Hole Well“ (2017)
• Supervisor at Study Program of Petroleum Engineering ITB on final project titled “Well Optimization for Production Test in Geothermal Deep Slim Hole Well“ (2017)

Lecturer Assistant:

• Lecture assistant at Department of Petroleum Engineering ITB on subjects “Drilling Engineering I (TM-3101)”, Department of Petroleum Engineering ITB (August – November 2015). Assisted the Lecturer in delivering courses and tutorial for Undergraduate Classes.
• Lecture assistant at Department of Petroleum Engineering ITB on subjects “Geothermal Engineering (TM- 4219)”, Department of Petroleum Engineering ITB (2012-2014). Assisted the Lecturer in delivering courses and tutorial for Undergraduate Classes.
• Lecture assistant at Geothermal Master Program ITB on subjects “Geothermal Well Drilling (PB-5010)” (2014 – 2017). Assisted the Lecturer in delivering courses and tutorial for Graduate Classes.
• Lecture assistant at Geothermal Master Program ITB on subjects “Geothermal Reservoir Simulation (PB-6017)” (2014). Assisted the Lecturer in delivering courses and tutorial for Graduate Classes.
• Lecture assistant at Geothermal Master Program ITB on subjects “Geothermal Production Engineering (PB- 5011)” (2014). Assisted the Lecturer in delivering courses and tutorial for Graduate Classes.

Supervisor Assistant:

• Supervisor assistant at Geothermal Master Program ITB on thesis titled “Integrated Analysis of Optimizing Casing Materials Selection of Geothermal Well by Using a Model for Calculating Corrosion Rates“ (2015)
• Supervisor assistant at Geothermal Master Program ITB on thesis titled “Calculation of Pressure Loss of Cementing in Geothermal Well X “(2015).
• Supervisor assistant at Geothermal Master Program ITB on thesis titled “Geothermal Rocks Compressive Strength Evaluation during Drilling Operation“(2016).

Research Member

• Corrosion model development for geothermal well casing material selection, GEOCAP program (2016). Mr. Maulana worked as research member on analyzing the consideration parameters of developing corrosion model on the geothermal well casing, and developing the model of material casing
• Geothermal Well Production Casing Design and Operation Optimization, Research and Innovation of Community Service (P3MI) Mr. Maulana is working as research member on analyzing the effects of compressive strength on production casing stresses design, and developing the optimize production of casing design in geothermal well.

Project Experience:

• Well drilling performance analysis and evaluation, Lahendong Geothermal Field, P.T. Pertamina Geothermal Energy Company (2013). The purposes of the project were to make analysis on drilling performance of bit, casing design, mud design, cementing design, well cleaning, and problem mitigation, find out room of improvement, and develop improvements in drilling operations through database and report
• Drilling skills training for lecturers and industries, Bandung, GEOCAP program (2016) as organizer and trainer
• Chevron Geothermal Indonesia assets peer review, T. Pertamina Geothermal Energy Company (2016).

Consultant:

• PT. Benvors Sarana Utama as software engineering (2016-2017)
• Workshop reviewer on titled “Opportunities and Challenges in Using Deep Slim Hole in Geothermal Exploration in Indonesia”, SMI (2017).

Wardana, ARK., N. Nandaliarasyad, DT. Maulana.“Preliminary Study of Membrane Technology to Resolve Silica Scaling to Enhance Geothermal Binary Power Plant”. IOP Conference Series: Earth and Environmental Science 417 (1), 012015. 2019.

Nandaliarasyad, N., DT Maulana, PS Darmanto. “Study of Development Scenarios for Bottoming Unit Binary Cycle to Utilize Exhaust Steam from Back Pressure Turbine Geothermal Power Plant”. IOP Conference Series: Earth and Environmental Science 417 (1), 012017. 2019.

A.H. Harahap, S. Rachmat, M.M. Saptadji and D.T. Maulana. “Overview of Hydraulic Fracturing Design in Geothermal Environment”. New Zealand Geothermal Workshop. 2019.

Immanuel L.G., Almas G.S.F.U, Dimas T.M. “Preliminary design study of wellbore heat exchanger in binary optimization for low-medium enthalpy to utilize non-self discharge wells in Indonesia”. IOP Conf. Series: Earth and Environmental Science 254 (2019) 012016. Doi:10.1088/1755-1315/254/1/012016.

Metra, Fadhilah., Fauzan Makarim, Hamzah, Dimas Taha Maulana, Amega Yasutra. “Deep Slimhole Well Performance for Geothermal Exploration”. Stanford Geothermal Workshop, Stanford, California, USA, February 12-14, 2018.

Allen Haryanto, Rizki T. Hutami, Qodri S. Ramadhan, Dimas T. Maulana, Muhammad M. Aquario. Geothermal Heat Loss Calculation: An Android Mobile Application Geothermal Exploration. ITB International Geothermal Workshop (IIGW), Bandung, Indonesia, 2017.

Maulana, D.T., Marbun B.T.H. : “ROP Modelling for Volcanic Geothermal Drilling Optimization”. World Geothermal Congress, Melbourne, Australia, 19-24 April 2015.

Maulana, D.T., Saptadji N.M.: “Scaling Depth Estimation in Water Dominated Geothermal Well”. 12^th Annual Indonesian Geothermal Association Meeting & Conference, Bandung, Indonesia, November 2012.

2017

Workshop Reviewer: Workshop on Opportunities and Challenges of Deep Slim Hole as a Geothermal Exploration Well in Indonesia. Jakarta, 15 August.

Course Participant: Geothermal Well Drilling Course. Cepu, East Java, 4–6 April.

2016

Conference Chairperson: Chairperson of Presentation Session, Indonesia International Geothermal Conference and Exhibition (IIGCE). Jakarta Convention Center, 10–11 August.

University Representative: Indonesia International Geothermal Conference and Exhibition (IIGCE). Jakarta Convention Center, 10–11 August.

Trainer: Geothermal Drilling Engineering Training, PT. Cogindo.

Batch I, Ruteng, NTT, 27 July – 1 August.

Batch II, Ruteng, NTT, 23–31 August.

Trainer: Geothermal Reservoir and Production Engineering: Knowledge and Skill, Geocap Training Course. ITB, Bandung.

Participant: Drilling Engineering and Well Integrity of Geothermal, Geocap Training Course. ITB, Bandung.

Committee Member: ITB Geothermal Workshop. ITB, Bandung.

2013

Committee Member: ITB Geothermal Workshop. ITB, Bandung.

2012

Participant: Pertemuan Ilmiah Tahunan Asosiasi Panas Bumi Indonesia (Annual Scientific Meeting of the Indonesian Geothermal Association). Bandung.

Participant: Geothermal Reservoir Engineering Course. ITB, Bandung.

Participant: ITB Geothermal Workshop. ITB, Bandung.

2011

Participant: Pertemuan Ilmiah Tahunan Asosiasi Panas Bumi Indonesia (Annual Scientific Meeting of the Indonesian Geothermal Association). Lampung.